georgiajams
09-18-2005, 10:08 AM
I need to sell my sump made from a 50 Breeder, but since it is a strange size (36 x 18 x 18 ), I figure I may need to just post it on eBay. But, let me know if you think you could use it and maybe we can work something out. You may want to make sure it will fit under your stand if you are interested.
Basically it is a 50 Breeder. 1/3 of it is partitioned as a refugium. Has baffles and is drilled on the side for 1 1/2 return (currently has the 1 1/2 bulkhead and ball valve attached). I used it on a 120 g tank, and then later used it with smaller tanks since I had it around.
The below picture was when it was new. It is now a few years old. No external leaks, but the inside baffles could use a new bead of silicone between them and the glass. It needs a new Kent float valve too (if you are planning on using it for top off), as I think I stripped the threads on it.[/img]
Basically it is a 50 Breeder. 1/3 of it is partitioned as a refugium. Has baffles and is drilled on the side for 1 1/2 return (currently has the 1 1/2 bulkhead and ball valve attached). I used it on a 120 g tank, and then later used it with smaller tanks since I had it around.
The below picture was when it was new. It is now a few years old. No external leaks, but the inside baffles could use a new bead of silicone between them and the glass. It needs a new Kent float valve too (if you are planning on using it for top off), as I think I stripped the threads on it.[/img]